FAQs

Run the rug lengthwise with the room’s longest wall or main seating axis to emphasize flow and visually elongate the space.

Use one rug per zone (living, dining, office). Align each rug with its furniture group to create clear pathways between areas.

Place non-slip mats outside the tub/shower and at the sink; choose rubber-backed, low-profile designs to reduce tripping.

Put a low-pile, washable runner in front of the sink or between sink and island; confirm appliances and doors clear the rug.

Use a low-profile rug/pad and leave 6–18 inches from walls; ensure the rug is at least as wide as the door and clears the swing.

Center runners with 4–6 inches of floor showing on each long side and leave 6–12 inches at each end.

Choose a round rug equal to the table diameter plus 24–30 inches total clearance; e.g., a 60-inch table pairs with \~9–10 feet.

Size so the rug extends 24–30 inches beyond the tabletop on all sides; this keeps chairs fully on the rug when pulled out.

Yes—use matching runners 2–3 feet wide along both sides; leave a few inches from the nightstands and 3–6 inches off walls.

Place a 9×12 under the bed, extending 18–24 inches around the sides/foot; alternatively, use two runners on either side for flexibility.

Center the rug and let it extend 18–24 inches beyond both sides and the foot; an 8×10 rug usually fits a queen best.

Layer it over a larger neutral base (jute/sisal); keep the top rug roughly two-thirds the size of the base to look intentional.